Compressed air is the safest power source in modern industry because it is flexible, environmentally friendly, safe and reliable, and its advantages can only be realized when these compressed air is clean. Dust particles always exist in the atmosphere, these particles are inhaled by the compressor, will be concentrated, in addition, according to the different compression models of more or less oil and fine oil mist form into the compressed air network, coupled with the adverse factors such as corrosion in the humid air system, will cause  major industrial problems, in order to solve these long-term problems plagued industrial enterprises, Handling as much flow as possible with the smallest possible filter material is our pursuit, folding the combination of multiple layers of filter materials to form the world's most advanced filtration technology.

Rated intake pressure: 0.7Mpa (0.6Mpa~ 1.0Mpa allowed)

Rated intake temperature: 10 ℃ ~30 ℃ (2℃~40 ℃ allowed)

Product dew point: -20 ℃~-40℃

Ambient temperature: ≤40℃

Pressure loss: ≤0.02Mpa

Regeneration method: no heat regeneration

Adsorbent: activated alumina

Intake oil content: ≤0. 1mg/m3

Average regeneration air consumption: 8-14% air consumption

Control mode: fully electronic programmable time control (dew point control is optional)

Installation method: No foundation in the room, concrete floor, the surrounding space is not less than 1.5 meters

Rated intake pressure: 0.7Mpa (0.6Mpa~1.0Mpa allowed)

Rated intake temperature: 10℃~30℃ (2℃~40℃ allowed)

Product dew point: -20℃~-40℃

Ambient temperature: ≤45℃

Pressure loss: ≤0.02Mpa

Regeneration method: micro-thermal regeneration

Adsorbent: activated alumina

Intake oil content: ≤0.1mg/m3

Average regeneration air consumption: 4-8% air consumption

Control mode: fully electronic programmable time control (dew point control is optional)

Installation method: No foundation in the room, concrete floor, the surrounding space is not less than 1.5 meters

Rated air intake pressure:0.7Mpa (0 .6 Mpa-1 .0 Mpa allowed, other working pressure accept custom) Rated air inlet temperature:50℃ ( limit air inlet temperature ≤80c )

pressure dew point: 2-10℃

Rated ambient temperature:32℃ (2c~45℃allowed) pressure

loss:≤0.02Mpa

cooling method: air cooling

Refrigerant: R22 ( R407 , R134a and other environmentally friendly refrigerant accept customization) Installation method: no foundation in the room ,concrete floor , leave no less than 1 .5 meters around

Energy conservation

Environmental protection

Low dew point

Stabilize

Durable

High efficiency host

Permanent magnet machine

High performance vector converter

water demineralizer

Man-machine interface system

Detachable water-cooled heat exchanger

Intake valve

Water filter

Special custom oil-free screw host

High efficiency and energy saving permanent magnet motor

Internet of Things PLC wireless expansion module

Efficient silent cooling fan

High efficiency permanent magnet converter

Intelligent microcomputer control system

Cold and hot zone design

A new generation of high screw mainframe

High efficiency induction  motor

SKF- Bearing

Efficient and powerful cooling system

Energy efficient filtration system

Multiple safety electric control protection

High quality independent oil pump forced lubrication design

A new generation of high screw mainframe

High performance vector frequency conversion control system 

High efficiency air cooled split permanent magnet motor

Efficient and powerful cooling system

Energy efficient filAdditional customized oil and gas separation systemstration system

Energy efficient filtration system

Energy saving intake control system

Special custom screw host

IP54 motor

Multi-channel fan cooling system

Stainless steel plate dryer

Compressed air precision filter

Large capacity gas storage tank

High efficiency vector inverter