The overclocking dual permanent magnet air compressor is driven by two independent iPM motors and intelligently controlled. During operation, by controlling the pressure between the two stages, the optimal speed of the two air outlets is automatically calculated to achieve the best efficiency of matching and balancing the optimal compression ratio, so that the compressor is always in the best operating state.

Firstly, high efficiency and energy conservation: ensuring that the gas station maintains a level one energy efficiency throughout its entire lifecycle.
Secondly, intelligent operation: multi-mode adaptive control; The operation of the device is not affected by the network; Continuously optimize the energy-saving points of the system.
Thirdly, plug and play: easy to operate, one click start stop.
Fourth, flexible customization: customized gas consumption according to needs.
Finally, box type integration: The compressed air system is highly modular and integrated, eliminating the need for users to spend time and manpower building stations.

The main function of a single-stage screw machine is to compress and transport gases. It compresses the gas through the rotation of the screw and delivers it to the designated outlet.

The working principle of a single-stage screw machine is based on the meshing between the screw and the casing, which generates volume changes through rotation to achieve gas compression and transportation. The specific process includes steps such as inhalation, compression, and exhaust to ensure that the gas is effectively compressed and delivered to the target location.

A high-efficiency energy-saving two-stage compression host that can reduce the load on the host bearings. The control system can achieve remote monitoring functions, including alarm, protection shutdown, and online visualization monitoring. The efficient energy-saving motor cooling system can adapt to any environmental condition and is extremely easy to maintain. Efficient and stable air volume regulation system, heavy-duty inlet filter, and efficient and stable air volume regulation system.

The whole machine adopts an integrated design, without complicated pipelines and lines, with fewer fault points and more stability; Less maintenance consumables (air filter element, water filter element), simple maintenance, no need for professional personnel to operate, ensuring less maintenance costs;

The engineering mining screw machine has compact and reasonable layout, convenient maintenance, sufficient air volume and stable pressure, and can adapt to the working conditions required by 80-200mm down the hole drill, anchor bolt drill, spray and other projects and mining. We use well-known domestic brands of two-stage compression screw hosts and Jiangtian IP55 two pole and four pole high-efficiency motors, emphasizing energy conservation and reliability. Realize power saving, energy saving, and high efficiency.

Suction dryer, also known as adsorption dryer, removes moisture from compressed air through the principle of pressure swing adsorption. It adopts a dual tower structure, with a desiccant (such as activated alumina) inside the tower. When compressed air enters the tower and comes into contact with the desiccant, it uses the principle of pressure swing adsorption to adsorb water, thereby reducing the dew point temperature of the compressed air. The dew point temperature of the suction dryer can reach below -40 ℃, ensuring the drying effect of compressed air.
Filters are used to remove pollutants such as oil, dust, and odors from compressed air.
Drying machines are mainly used to remove moisture from compressed air.